Skip Navigation LinksHome > G503 WWII Ford Willys Jeep Restoring > G503 WWII Jeep Rebuilding Shocks
If this helped...
MB GPW G503 WWII Military Jeep Rebuilding Shocks WW2 Restoration

This Article describes how to rebuild your WWII Jeep original shocks. Applies to 1942,42,1943,43,1944,44,1945 Jeeps models


This article applies to both Willys MB and Ford GPW WWII Military Jeeps 

1. This article is still in research mode... First, it is believed that Ford used Gabriel Shocks that cannot be rebuilt. Gabriel shocks did not have a tab to open the shock. Willys used a Monroe shock which has a "tab" on the top part, see below. Front vs Back Shocks If you look closely, you should see that your front shocks are different from your back shocks. According to TM 1513 - The shock absorbers are direct action type, two way control and are adjustable.

2. The range of adjustment is four turns. Look at the diagram, and see if you can push the bottom up into the key, and turn clockwise for firmness (rough roads), or counterclockwise for less.

3. In order to rebuild your shocks you must have the type of shock that has a tab on the side of the main cylinder

4. more to come ... here is a link to some steps that are helpful. (until we can get them completed)




WWII Jeep Registry

We log all jeeps by serial number...add yours!

Stay Informed

Subscribe to our e-news. Every month you recieve all the latest info, straight to your inbox.

  • New Article Signup-disabled temporarily
  • Give us Feedback-disabled temporarily
  • Contact me at: